Speaker
Description
High-pressure synthesis of F-doped SmFeAsO with extended fluorine substitution: towards iron-based conductors for high-field magnets
Mohammad Azam$^{1,*}$, Tatiana Zajarniuk$^{2}$, Ryszard Diduszko$^{2,3}$, Taras Palasyuk$^{4}$, Cezariusz Jastrzębski$^{4}$, Andrzej Szewczyk$^{2}$, Hiraku Ogino$^{5}$, Shiv J. Singh$^{1}$
$^{1}$Institute of High Pressure Physics (IHPP), Polish Academy of Sciences, Sokołowska 29/37, 01-142 Warsaw, Poland
$^{2}$Institute of Physics, Polish Academy of Sciences, Aleja Lotników 32/46, 02-668 Warsaw, Poland
$^{3}$National Centre for Nuclear Research, Andrzeja Sołtana 7/3, 05-400 Otwock-Świerk, Poland
$^{4}$Faculty of Physics, Warsaw University of Technology, Koszykowa 75, 00-662 Warsaw, Poland
$^{5}$Core Electronics Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8568, Japan
*Corresponding author: mohammadazam@unipress.waw.pl
Abstract
Future accelerator and fusion magnets require superconductors capable of carrying high current densities in intense magnetic fields. Fluorine-doped SmFeAsO (Sm1111) is a promising high- Tc iron-based superconductors, combining a transition temperature (Tc ≈ 57–58 K) with an upper critical field (Hc2) exceeding 70 T. However, its synthesis under conventional ambient-pressure conditions (CSP-AP) is challenging because of fluorine loss at elevated temperatures, which limits fluorine incorporation to x ≈ 0.20–0.25 and results in relatively low critical current densities $J_c \sim 10^{2}-10^{3}\,\mathrm{A/cm^2}$. To overcome these issues, polycrystalline $\mathrm{SmFeAsO}_{1-x}\mathrm{F}_x$ (0.05 ≤ x ≤ 0.40) was synthesized in a single in-situ step using a cubic-anvil high-pressure (CA-HP) technique at 4 GPa and 1400 °C for 1 h. Structural analysis and Raman spectroscopy confirm the dominance of the tetragonal Sm1111 phase across the composition series, while the relative density reaches 98%. In the underdoped regime, the onset Tc is enhanced by 13–17 K and Jc improves by up to an order of magnitude compared with CSP-AP samples. The superconducting phase diagram exhibits a dome-shaped composition dependence, with Tc reaching 57.3 K at x = 0.20 and Jc attaining $\sim 10^{4}\,\mathrm{A\,cm^{-2}}$ at 5 K near x = 0.25. The Werthamer–Helfand–Hohenberg model estimates Hc2 to approach 200 T, highlighting the potential for high-field applications. Analysis of the thermally activated flux-flow reveals a power-law dependence of the vortex activation energy, consistent with collective vortex-pinning behaviour. At higher fluorine contents (x > 0.30), grain-boundary accumulation of SmOF, SmAs and FeAs secondary phases is associated with reduced Jc. These findings establish high-pressure synthesis as an effective approach to improving fluorine incorporation and optimizing Sm1111 superconductivity, supporting further the development of its wires and tapes for accelerator and fusion magnets.
Acknowledgements:
The work was funded by SONATA-BIS 11 project (Registration number: 2021/42/E/ST5/00262) sponsored by the National Science Centre (NCN), Poland. SJS acknowledges financial support from the National Science Centre (NCN), Poland through research Project number: 2021/42/E/ST5/00262. We would like to acknowledge H. Kito, AIST for his assistance during the experiments with cubic anvil high-pressure (CA-HP) techniques.
| Thematic blocks | Superconductors - Materials and Technologies, |
|---|---|
| Presentation form prefert | poster |