Speaker
Description
Design of superconducting magnets requires specialized numerical tools to solve transient thermo-electro-hydraulic equations describing coolant flow, electric current and temperature evolution. Due to the complexity of superconducting cable geometry, 1D approximations are often employed to enable simulations of full coils, which often contain more than a kilometer of cable. A commonly used tool in the community is the Cryosoft THEA code [1] which allows the simulation of superconducting cables, coils, or multiple coils connected in series such that there is a continuous hydraulic flow path.
Realistic coils for tokamaks such as ITER or DEMO have much more complex hydraulic connections and can comprise dozens of pancakes or layers connected both in series and in parallel. To simulate them, multiple Cryosoft tools were combined via co-simulation, e.g., Cryosoft HEATER heat conduction in solids. The tool needed to orchestrate the co-simulation is Cryosoft SUPERMAGNET. To simulate other physical phenomena, such as deformations and stresses, additional simulation tools, such as ANSYS, are needed.
A present limitation of the HEATER models is the pre- and post-processing, so that data exchange with other software requires user-written code. To facilitate thermo-mechanical analyses, a new coupling approach has been developed, coupling the THEA code with ANSYS, which provides a wide range of capabilities for thermal simulations, including not only heat conduction and convection, as in HEATER, but also radiation and interfaces, in arbitrary 3D geometries. Using ANSYS instead of HEATER allows straightforward coupling to a mechanical models, as well as providing pre- and post-processing capabilities that are presently not available in HEATER. Also ANSYS benefits from using multiple CPUs to speed up the simulation compared with the HEATER code.
The co-simulation framework was developed based on the principles of SUPERMAGNET, with information exchanged via flags written to files. The ANSYS coupling component was written in the APDL scripting language. A test case of a solenoid layer was solved using the THEA-HEATER and THEA-ANSYS coupling schemes to benchmark the methodology. The I/O speed limitation was overcome by storing the model in RAM, thereby reducing the communication overhead.
The study also includes a computational cost analysis of the HEATER and ANSYS analyses, as well as the impact of mesh numbering on the HEATER solution times. Algorithms for mesh export from ANSYS to HEATER and for optimizing the bandwidth and profile of the resulting matrix were developed, thereby facilitating the creation of parametric models for Cryosoft simulations. The approach can be used to perform full-scale thermo-hydraulic-mechanical simulations of large coils, such as non-planar coils of the W7-X stellarator [2] during quench scenarios, and it provides vital information for the further development of custom solvers.
[1] Bottura L, Rosso C, Breschi M. A general model for thermal, hydraulic and electric analysis of superconducting cables. Cryogenics (Guildf) 2000;40:617–26. https://doi.org/10.1016/S0011-2275(01)00019-4.
[2] Ortwein R, Dembkowska A, Lewandowska M, Risse K, Bykov V, Khokhlov M. Thermo-hydraulic and 3D mechanical analysis of the stresses in the electrical insulation of the W7-X non-planar coil during quench. Cryogenics (Guildf) 2026:104462. https://doi.org/10.1016/j.cryogenics.2026.104462.
| Thematic blocks | Cryogenics for Accelerators, Fusion Technology and High Field Magnets |
|---|---|
| Presentation form prefert | poster |